Our Digital and Touchscreen Thermostats are intended for use with GG or G2 Rated Units.

They are perfectly suited to control the temperature within spaces that most typically are unclassified and located in an unclassified Area (for GG Rated Units) or declassified by an integrated Unit Pressurization System and located in a Class I, Division 2, Group A-D Area (for G2 Rated Units).

Key features include a digital temperature display and control buttons which permit easy adjustment of temperature settings and operating modes. Other control features vary slightly as detailed below, but include daily operation programmability, and tamper lockouts.

These very economical control systems are ideal for rooms or buildings where no flammable or ignitable substances are stored or processed. Typical applications include Control Rooms, Non-Volatile Analyzer and Lab Rooms, Switchgear and Motor Control Buildings, Guard Shacks, Data-Logging Units, Pump Houses, Metering Stations, Break Rooms, Locker Rooms, Shower Rooms and Restrooms.

For more information, please contact a Bebco Sales Associate.

Bebco Smart Digital Controls are available with all Bebco Express and Custom Series Model WAC and WHP Wall Mount Air Conditioners and Heat Pumps.

Key features include a digital temperature display and unit status display, along with control buttons which permit easy adjustment of unit and fan operating modes. This Control also provides complete on-board unit diagnostics,high and low room temperature alarm setpoints low and high refrigerant pressure alarms, tamper resistant lockouts and unit fault alarms.

Bebco Touch Screen Controls provide an even greater level of features and are available with Custom Series Units.  Beyond compare, they provide the highest level of integrated HVAC, Pressurization, Ventilation and Filtration Systems, along with a suite of Multiple Unit Control Systems, customized to meet your precise needs. 

For more information, please contact a Bebco Sales Associate.

Bebco applies over 30 years of experience with state-of the-art programmable digital controls to provide the perfect fully integrated control solution for protection of your Building or Room environment. 

NFPA 496 compliant Pressurization Controls typically include a three-position on-off-auto switch and differential pressure transmitter.  These devices interface with Unit operation lockout and Pressurization System Variable Speed Drives and super quiet backward-inclined blower wheel motors, to provide soft ramp up and ramp down of airflow rates to achieve necessary velocities through egress points.  Room Pressure is displayed on the transmitter, and a 4-20 Ma output signal can also be routed to a digital display meter at a remote location. 

Typical applications include Control Rooms, Safe Havens, Switchgear and Motor Control Buildings, VFD Buildings, Data-Logging Units, Pump Houses and Metering Stations.

API RP-500 compliant Ventilation Controls typically include an on-off-auto switch and remotely mounted explosion proof air flow meter.  This device is highly accurate, and provides the ability to measure, adjust and locally or remotely display inlet or outlet room airflow.   As airflow is measured at the location of your choice (typically in the fresh air intake stake) to achieve your required building or room air changes per hour, it will be displayed on our Smart Digital Control or Smart Touch Screen Control devices, or you can route the 4-20 Ma signal to a digital display meter at a remote location.

Typical applications include Analyzer and Lab Rooms, Chemical Dispensing & Filling Station Rooms or other buildings or rooms which contain, store or process hazardous flammable gases, vapors or liquids.

At your request, Bebco will engineer and fabricate custom control panels to meet any needs or requirements, utilizing any of the above listed control devices to provide you with a customized HVAC Control System.

Seamless Integration of HVAC Unit Room Temperature and Humidity Level Settings and Run Time Controls, Pressurization, Ventilation or Gas Phase Filtration System Controls and Panel Mounted Unit or Protection System Failure and Gas Detection System Alarm Sensors and Devices are among the many options!

Typical applications include large Control Rooms, Analyzer Houses, Safe Havens, Switchgear and Motor Control Buildings, VFD Buildings, Data-Logging Units, Pump Houses and Metering Stations.

As an option, Bebco applies extraordinary measures to apply coatings to both coils and all refrigerant tubing of Express and Custom Series Wall Units, to fully protect the the refrigerant system.

To ensure the highest level of protection and coating adhesion, the fully charged refrigerant system including the compressor, coils and refrigerant system tubing are first removed from the Unit case and carefully cleaned in accordance with the coating manufacturer’s requirements prior to coating application. Selecting this vital option will provide protection against mild, moderate or extremely corrosive environments, whether exposure duration is considered to be intermittent, prolonged or continuous.

Our EC Style steel cases feature an epoxy paint finish as standard and our CC Style Steel Cases can feature your choice of paint finish as listed below.

Our ES, CS and CX Style stainless steel cases feature a brushed finish as standard. 

However, you may also enhance corrosion resistance of all cases with sprayed urethane or resilient powder coated finish, or a custom finish of your choice!

This wide range of finish options addresses passive to severely corrosive environments and a custom color and finish may be selected to match a building paint scheme.