America's Best Explosion-Proof Split System Air Conditioners & Heat Pumps

Model Number Matrix

The Model Number Segments below specify standard features and options for our Explosion Proof Split System Air Conditioners and Heat Pumps.

Please note limitations to various selections appear in black italic text.

Helpful information is provided just below each Segment and applicable Model Number Selection Notes at the bottom of this page.

As always, please feel free to contact a Bebco Sales Associate for assistance!

Typical Model Number:

Model
Number:
EC

-

SAC

-

090

-

S06

-

A

-

HX

-

1620
Segments:
1
2
3
4A & 4B
5
6A & 6B
7A & 7B

1 – Condenser Case Style & Material

ECEconomy Grade Painted Carbon Steel
CSCommercial Grade 304 Stainless Steel
CXCommercial Grade 316 Stainless Steel
Click here to learn more...

Bebco offers three condenser case styles to provide either the greatest degree of economy or highest level of durability.  Regardless of which Control System you select, our Economy Grade Units feature 20 gauge steel cases with a baked enamel finish and galvanized steel interior brackets and partitions, suitable for passive to mildly corrosive atmospheres, and our Commercial Grade Units are formed entirely from either 304 or 316 stainless steel and feature a 2B finish.

To further enhance corrosion resistance, the case and all internal parts of our Economy and Commercial Grade Units are also available with sprayed or powder coated paint finishes, to ensure years of service in moderate to highly corrosive atmospheres. We also offer custom finishes, and rest assured our condenser cases provide easy and ample access for servicing all components.

For assistance in selecting the proper case style and material for your application, please contact a Bebco Sales Associate now!

2 – Configuration

SACSplit System Air Conditioner

(Smart Controls only)
SHPSplit System Heat Pump

(Basic, Eco or Smart Controls)
Click here to learn more...

Bebco offers our Split System Units in heat pump configurations with Basic or Eco Pump™ Control Systems or in heat pump or air conditioner configurations with our Smart Pump™ or Smart Cool™ Control Systems.

Whether you purchase an Air Conditioner which is ideal for colder climates or a Heat Pump which is ideal for more temperate climates, Bebco can also provide a wall mounted convection heater of your choice to complement your Split System Unit!  The convection heater will then provide primary or supplemental comfort heating, as needed during cold weather conditions.

For more information and selection assistance regarding these unique and exclusive configuration options for your split system unit, please contact a Bebco Sales Associate now!

3 – Cooling Capacity

0909,000 BTUH (0.75 Ton)
12012,000 BTUH (1.00 Ton)
18018,000 BTU (1.50 Tons)
24024,000 BTU (2.00 Tons)
36036,000 BTU (3.00 Tons)
Click here to learn more...

The fully certified line of Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps range from a capacity of 9,000 to 36,000 BTUH.  These Units meet applications ranging from small kiosks or guard shacks to large control rooms, security centers, and other buildings or rooms with low to moderate heat loads.

As required, Bebco can also provide large Split System Units in self-certified versions or with limited production third-party certifications!

Bebco offers free sizing assistance based upon the data you supply regarding your application, and depending on your needs can recommend one or more units to satisfy any application.

Take advantage of our complementary unit sizing assistance by contacting a Bebco Sales Associate now!

4 – Controls

Segment A: Control System 1*
BBasic Controls for Unclassified Areas

(for SHP Units, with Unclassified Interior and Exterior Area Ratings)***
EEco Pump™ Controls for Hazardous Areas

(for SHP Units, with Unclassified Interior and CI, D2 Exterior Area Rating)
SSmart Cool™ or Smart Pump™ Controls for Hazardous Areas

(for SAC or SHP Units, with CI, D2 Interior and Exterior Area Ratings)
Segment B: Evaporator Unit Control Cable Length

(for Smart Controls only)
066 Feet

(standard)
2020 Feet
4040 Feet
XXExcluded

(for Eco Pump™ Controls)
Click here to learn more...

Our Basic Control Systems are operated by a hand-held remote control and are primarily intended for use in rooms or buildings that must withstand or may contain mild to highly corrosion environments in Unclassified Areas.

Our Eco Pump™ Control Systems make SHP Configuration Units suitable for buildings or rooms with a de-classified or Unclassified interior rating and a Class I, Division 2, Group A-D exterior rating. This economical control system is also operated by a hand-held remote control to facilitate easy operation!   

Our Smart Pump™ and Smart Cool™ Control Systems make SAC or SHP Configuration Units suitable for buildings or rooms with a Class I, Division 2, Group A-D interior and exterior ratings. These more advanced control systems incorporate an intuitive touch screen control interface in a wall mounted enclosure. Advanced features include diagnostics to detect high refrigerant pressures and indicate when the evaporator fan, condenser fan and compressor are engaged!  

For more information and selection assistance regarding these controls, please see the Optional Features Page of this Product Section or contact a Bebco Sales Associate now!

5 – Operating Voltage

Z120 VAC Single Phase 60 Hz

(090 & 120 Units)
A208/230 VAC Single Phase 60 Hz

(180, 240 & 360 Units)
UCustom Voltage

(consult factory for alternate power supply options)
Click here to learn more...

Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps are offered in specific voltages, as indicated in the Model Number Matrix. As noted, our 9,000 and 12,000 BTUH Units require a 120 VAC Power Source, and our 18,000 to 36,000 BTUH Units require a 208/230 VAC Power Source.

For the specific amperage requirements of each unit, please visit the Drawings and Specifications Page in this Product Section.   However, please note Bebco can easily supply power transformers for your Split System Air Conditioner or Heat Pump Unit to operate using your available power source.

For more information regarding our unit operating voltages, please contact a Bebco Sales Associate now!

6 – Coil Coatings & Condenser Case Finishes

Segment A: Coil & Refrigerant Tube Coatings *2
CHeresite® ES-600 Coating

(condenser unit only)
EHeresite® ES-600 Coating

(evaporator unit only)
HHeresite® ES-600 Coating

(both units)
UCustom Coating

(consult factory)
XExcluded
Segment B: Condenser Case Finish *3
N2B Cover Finish

(for CS & CX Cases)
SWhite Sprayed Urethane
PWhite Epoxy Powder Coated
XExcluded

(for EC Cases Only)
GANSI 61 Gray Sprayed Urethane
TANSI 61 Gray Powder Coated
UCustom Finish
Click here to learn more...

Warranted by the demands of harshly corrosive environments such as Hydrogen Sulfide or Chlorine in some refineries and off-shore environments, Bebco provides Heresite® ES-600 Condenser Coil and Refrigerant Tubing Coatings as an option to protect all Model SAC and SHP Condenser and Evaporator Units coils and refrigerant tubing.

Please contact a Bebco Sales Associate now for more information!

To further supplement corrosion protection, Bebco also offers numerous case finishes for our Stainless Steel CS and CX Condenser Cases. These sprayed and powder coated paint finishes greatly extend the service life of the cover, base, brackets and partitions, and ensure years of corrosion resistance to elements such as Hydrogen Sulfide, Chlorine, and Offshore Salt-Air Environments.

Please contact a Bebco Sales Associate now for more information regarding condenser unit case and chassis finishes!

7 – Condenser Line Set, Power Cable & Control Cable Lengths *4

Segment A: Line Set Length
1616 Feet

(standard)
2525 Feet
4040 Feet
Segment B: Evaporator Unit Power Cable & Condenser Unit Control Cable Lengths
2020 Feet

(standard)
3030 Feet
5050 Feet
Click here to learn more...

All Bebco Model SAC & SHP Split System Air Conditioners and Heat Pumps are provided with pre-insulated refrigerant tubing lines, pre fitted with connection fittings to interconnect the Evaporator and Condenser Units.  A 16 foot long line set is supplied as our standard at no additional charge, and 25 and 40 feet line sets are also available. 

We also provide 20 foot long power and control cables to interconnect the Evaporator Unit, Smart Control Enclosure if applicable and the Condenser Unit, and 30 and 50 feet cables also available as options. 

Please ensure the line set length you select will be sufficient for unit interconnection by a licensed air conditioning technician, and please also consider contacting a Bebco Sales Associate for assistance in selecting the correct line set and cable length!

* MODEL NUMBER SELECTION NOTES:

  1. SHP Units with “B” Basic Controls are intended for use in unclassified areas, with all optional case material, coil coating and case finishes. *** Please note Units with “B” Controls do not feature Hazardous Location modifications, and are therefore classified as Ordinary Location HVAC Devices and provided with Original Factory Certification Markings.
    SHP Units with “E” Eco Pump™ Controls are suitable for Buildings or Rooms with Pressurized or Unclassified Interior Ratings with Class I, Division 2, Group A-D Exterior Ratings.
    SAC & SHP Units with “S” Smart Cool™ or Smart Pump™ Controls are suitable for Buildings or Rooms with Class I, Division 2, Group A-D Interior and Exterior Ratings.
    Please contact a Bebco Sales Associate for custom control enclosure cable length.
  2. Please note Coil Coatings are not applied to Line Sets, as specified in the last Segment.
    Please specify custom coating in writing at time of order.
  3. 2b Finish applies to Condenser Unit case only – chassis parts are not finished. All other finishes apply to Condenser Unit case and chassis parts. Please specify custom Condenser Unit finish in writing at time of order.
  4. Please carefully evaluate Line Set and Cable Lengths required before placing an order, and contact a Bebco Sales Associate for custom line set and cable lengths.

Please contact us for information regarding any aspect of unit customization.
We’ll be pleased to review all aspects of this unique product and strive to meet any special requirements!

America's Best Explosion-Proof Split System Air Conditioners & Heat Pumps

Model Number Matrix

The Model Number Segments below specify standard features and options for our Explosion Proof Split System Air Conditioners and Heat Pumps.

Please note limitations to various selections appear in black italic text.

Helpful information is provided just below each Segment and applicable Model Number Selection Notes at the bottom of this page.

As always, please feel free to contact a Bebco Sales Associate for assistance!

Typical Model Number:

Model
Number:
EC

-

SAC

-

090

-

S06

-

A

-

HX

-

1620
Segments:
1
2
3
4A & 4B
5
6A & 6B
7A & 7B

1 – Condenser Case Style & Material

ECEconomy Grade Painted Carbon Steel
CSCommercial Grade 304 Stainless Steel
CXCommercial Grade 316 Stainless Steel
Click here to learn more...

Bebco offers three condenser case styles to provide either the greatest degree of economy or highest level of durability.  Regardless of which Control System you select, our Economy Grade Units feature 20 gauge steel cases with a baked enamel finish and galvanized steel interior brackets and partitions, suitable for passive to mildly corrosive atmospheres, and our Commercial Grade Units are formed entirely from either 304 or 316 stainless steel and feature a 2B finish.

To further enhance corrosion resistance, the case and all internal parts of our Economy and Commercial Grade Units are also available with sprayed or powder coated paint finishes, to ensure years of service in moderate to highly corrosive atmospheres. We also offer custom finishes, and rest assured our condenser cases provide easy and ample access for servicing all components.

For assistance in selecting the proper case style and material for your application, please contact a Bebco Sales Associate now!

2 – Configuration

SACSplit System Air Conditioner

(Smart Controls only)
SHPSplit System Heat Pump

(Basic, Eco or Smart Controls)
Click here to learn more...

Bebco offers our Split System Units in heat pump configurations with Basic or Eco Pump™ Control Systems or in heat pump or air conditioner configurations with our Smart Pump™ or Smart Cool™ Control Systems.

Whether you purchase an Air Conditioner which is ideal for colder climates or a Heat Pump which is ideal for more temperate climates, Bebco can also provide a wall mounted convection heater of your choice to complement your Split System Unit!  The convection heater will then provide primary or supplemental comfort heating, as needed during cold weather conditions.

For more information and selection assistance regarding these unique and exclusive configuration options for your split system unit, please contact a Bebco Sales Associate now!

3 – Cooling Capacity

0909,000 BTUH (0.75 Ton)
12012,000 BTUH (1.00 Ton)
18018,000 BTU (1.50 Tons)
24024,000 BTU (2.00 Tons)
36036,000 BTU (3.00 Tons)
Click here to learn more...

The fully certified line of Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps range from a capacity of 9,000 to 36,000 BTUH.  These Units meet applications ranging from small kiosks or guard shacks to large control rooms, security centers, and other buildings or rooms with low to moderate heat loads.

As required, Bebco can also provide large Split System Units in self-certified versions or with limited production third-party certifications!

Bebco offers free sizing assistance based upon the data you supply regarding your application, and depending on your needs can recommend one or more units to satisfy any application.

Take advantage of our complementary unit sizing assistance by contacting a Bebco Sales Associate now!

4 – Controls

Segment A: Control System 1*
BBasic Controls for Unclassified Areas

(for SHP Units, with Unclassified Interior and Exterior Area Ratings)***
EEco Pump™ Controls for Hazardous Areas

(for SHP Units, with Unclassified Interior and CI, D2 Exterior Area Rating)
SSmart Cool™ or Smart Pump™ Controls for Hazardous Areas

(for SAC or SHP Units, with CI, D2 Interior and Exterior Area Ratings)
Segment B: Evaporator Unit Control Cable Length

(for Smart Controls only)
066 Feet

(standard)
2020 Feet
4040 Feet
XXExcluded

(for Eco Pump™ Controls)
Click here to learn more...

Our Basic Control Systems are operated by a hand-held remote control and are primarily intended for use in rooms or buildings that must withstand or may contain mild to highly corrosion environments in Unclassified Areas.

Our Eco Pump™ Control Systems make SHP Configuration Units suitable for buildings or rooms with a de-classified or Unclassified interior rating and a Class I, Division 2, Group A-D exterior rating. This economical control system is also operated by a hand-held remote control to facilitate easy operation!   

Our Smart Pump™ and Smart Cool™ Control Systems make SAC or SHP Configuration Units suitable for buildings or rooms with a Class I, Division 2, Group A-D interior and exterior ratings. These more advanced control systems incorporate an intuitive touch screen control interface in a wall mounted enclosure. Advanced features include diagnostics to detect high refrigerant pressures and indicate when the evaporator fan, condenser fan and compressor are engaged!  

For more information and selection assistance regarding these controls, please see the Optional Features Page of this Product Section or contact a Bebco Sales Associate now!

5 – Operating Voltage

Z120 VAC Single Phase 60 Hz

(090 & 120 Units)
A208/230 VAC Single Phase 60 Hz

(180, 240 & 360 Units)
UCustom Voltage

(consult factory for alternate power supply options)
Click here to learn more...

Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps are offered in specific voltages, as indicated in the Model Number Matrix. As noted, our 9,000 and 12,000 BTUH Units require a 120 VAC Power Source, and our 18,000 to 36,000 BTUH Units require a 208/230 VAC Power Source.

For the specific amperage requirements of each unit, please visit the Drawings and Specifications Page in this Product Section.   However, please note Bebco can easily supply power transformers for your Split System Air Conditioner or Heat Pump Unit to operate using your available power source.

For more information regarding our unit operating voltages, please contact a Bebco Sales Associate now!

6 – Coil Coatings & Condenser Case Finishes

Segment A: Coil & Refrigerant Tube Coatings *2
CHeresite® ES-600 Coating

(condenser unit only)
EHeresite® ES-600 Coating

(evaporator unit only)
HHeresite® ES-600 Coating

(both units)
UCustom Coating

(consult factory)
XExcluded
Segment B: Condenser Case Finish *3
N2B Cover Finish

(for CS & CX Cases)
SWhite Sprayed Urethane
PWhite Epoxy Powder Coated
XExcluded

(for EC Cases Only)
GANSI 61 Gray Sprayed Urethane
TANSI 61 Gray Powder Coated
UCustom Finish
Click here to learn more...

Warranted by the demands of harshly corrosive environments such as Hydrogen Sulfide or Chlorine in some refineries and off-shore environments, Bebco provides Heresite® ES-600 Condenser Coil and Refrigerant Tubing Coatings as an option to protect all Model SAC and SHP Condenser and Evaporator Units coils and refrigerant tubing.

Please contact a Bebco Sales Associate now for more information!

To further supplement corrosion protection, Bebco also offers numerous case finishes for our Stainless Steel CS and CX Condenser Cases. These sprayed and powder coated paint finishes greatly extend the service life of the cover, base, brackets and partitions, and ensure years of corrosion resistance to elements such as Hydrogen Sulfide, Chlorine, and Offshore Salt-Air Environments.

Please contact a Bebco Sales Associate now for more information regarding condenser unit case and chassis finishes!

7 – Condenser Line Set, Power Cable & Control Cable Lengths *4

Segment A: Line Set Length
1616 Feet

(standard)
2525 Feet
4040 Feet
Segment B: Evaporator Unit Power Cable & Condenser Unit Control Cable Lengths
2020 Feet

(standard)
3030 Feet
5050 Feet
Click here to learn more...

All Bebco Model SAC & SHP Split System Air Conditioners and Heat Pumps are provided with pre-insulated refrigerant tubing lines, pre fitted with connection fittings to interconnect the Evaporator and Condenser Units.  A 16 foot long line set is supplied as our standard at no additional charge, and 25 and 40 feet line sets are also available. 

 

We also provide 20 foot long power and control cables to interconnect the Evaporator Unit, Smart Control Enclosure if applicable and the Condenser Unit, and 30 and 50 feet cables also available as options. 

 

Please ensure the line set length you select will be sufficient for unit interconnection by a licensed air conditioning technician, and please also consider contacting a Bebco Sales Associate for assistance in selecting the correct line set and cable length!

* MODEL NUMBER SELECTION NOTES:

  1. SHP Units with “B” Basic Controls are intended for use in unclassified areas, with all optional case material, coil coating and case finishes. *** Please note Units with “B” Controls do not feature Hazardous Location modifications, and are therefore classified as Ordinary Location HVAC Devices and provided with Original Factory Certification Markings.
    SHP Units with “E” Eco Pump™ Controls are suitable for Buildings or Rooms with Pressurized or Unclassified Interior Ratings with Class I, Division 2, Group A-D Exterior Ratings.
    SAC & SHP Units with “S” Smart Cool™ or Smart Pump™ Controls are suitable for Buildings or Rooms with Class I, Division 2, Group A-D Interior and Exterior Ratings.
    Please contact a Bebco Sales Associate for custom control enclosure cable length.
  2. Please note Coil Coatings are not applied to Line Sets, as specified in the last Segment.
    Please specify custom coating in writing at time of order.
  3. 2b Finish applies to Condenser Unit case only – chassis parts are not finished. All other finishes apply to Condenser Unit case and chassis parts. Please specify custom Condenser Unit finish in writing at time of order.
  4. Please carefully evaluate Line Set and Cable Lengths required before placing an order, and contact a Bebco Sales Associate for custom line set and cable lengths.

Please contact us for information regarding any aspect of unit customization.
We’ll be pleased to review all aspects of this unique product and strive to meet any special requirements!

America's Best Explosion-Proof Split System Air Conditioners & Heat Pumps

Model Number Matrix

The Model Number Segments below specify standard features and options for our Explosion Proof Split System Air Conditioners and Heat Pumps.

Please note limitations to various selections appear in black italic text.

Helpful information is provided just below each Segment and applicable Model Number Selection Notes at the bottom of this page.

As always, please feel free to contact a Bebco Sales Associate for assistance!

Typical Model Number:

Model
Number:
EC

-

SAC

-

090

-

S06

-

A

-

HX

-

1620
Segments:
1
2
3
4A & 4B
5
6A & 6B
7A & 7B

1 – Condenser Case Style & Material

ECEconomy Grade Painted Carbon Steel
CSCommercial Grade 304 Stainless Steel
CXCommercial Grade 316 Stainless Steel
Click here to learn more...

Bebco offers three condenser case styles to provide either the greatest degree of economy or highest level of durability.  Regardless of which Control System you select, our Economy Grade Units feature 20 gauge steel cases with a baked enamel finish and galvanized steel interior brackets and partitions, suitable for passive to mildly corrosive atmospheres, and our Commercial Grade Units are formed entirely from either 304 or 316 stainless steel and feature a 2B finish.

To further enhance corrosion resistance, the case and all internal parts of our Economy and Commercial Grade Units are also available with sprayed or powder coated paint finishes, to ensure years of service in moderate to highly corrosive atmospheres. We also offer custom finishes, and rest assured our condenser cases provide easy and ample access for servicing all components.

For assistance in selecting the proper case style and material for your application, please contact a Bebco Sales Associate now!

2 – Configuration

SACSplit System Air Conditioner

(Smart Controls only)
SHPSplit System Heat Pump

(Basic, Eco or Smart Controls)
Click here to learn more...

Bebco offers our Split System Units in heat pump configurations with Basic or Eco Pump™ Control Systems or in heat pump or air conditioner configurations with our Smart Pump™ or Smart Cool™ Control Systems.

Whether you purchase an Air Conditioner which is ideal for colder climates or a Heat Pump which is ideal for more temperate climates, Bebco can also provide a wall mounted convection heater of your choice to complement your Split System Unit!  The convection heater will then provide primary or supplemental comfort heating, as needed during cold weather conditions.

For more information and selection assistance regarding these unique and exclusive configuration options for your split system unit, please contact a Bebco Sales Associate now!

3 – Cooling Capacity

0909,000 BTUH (0.75 Ton)
12012,000 BTUH (1.00 Ton)
18018,000 BTU (1.50 Tons)
24024,000 BTU (2.00 Tons)
36036,000 BTU (3.00 Tons)
Click here to learn more...

The fully certified line of Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps range from a capacity of 9,000 to 36,000 BTUH.  These Units meet applications ranging from small kiosks or guard shacks to large control rooms, security centers, and other buildings or rooms with low to moderate heat loads.

As required, Bebco can also provide large Split System Units in self-certified versions or with limited production third-party certifications!

Bebco offers free sizing assistance based upon the data you supply regarding your application, and depending on your needs can recommend one or more units to satisfy any application.

Take advantage of our complementary unit sizing assistance by contacting a Bebco Sales Associate now!

4 – Controls

Segment A: Control System 1*
BBasic Controls for Unclassified Areas

(for SHP Units, with Unclassified Interior and Exterior Area Ratings)***
EEco Pump™ Controls for Hazardous Areas

(for SHP Units, with Unclassified Interior and CI, D2 Exterior Area Rating)
SSmart Cool™ or Smart Pump™ Controls for Hazardous Areas

(for SAC or SHP Units, with CI, D2 Interior and Exterior Area Ratings)
Segment B: Evaporator Unit Control Cable Length

(for Smart Controls only)
066 Feet

(standard)
2020 Feet
4040 Feet
XXExcluded

(for Eco Pump™ Controls)
Click here to learn more...

Our Basic Control Systems are operated by a hand-held remote control and are primarily intended for use in rooms or buildings that must withstand or may contain mild to highly corrosion environments in Unclassified Areas.

Our Eco Pump™ Control Systems make SHP Configuration Units suitable for buildings or rooms with a de-classified or Unclassified interior rating and a Class I, Division 2, Group A-D exterior rating. This economical control system is also operated by a hand-held remote control to facilitate easy operation!   

Our Smart Pump™ and Smart Cool™ Control Systems make SAC or SHP Configuration Units suitable for buildings or rooms with a Class I, Division 2, Group A-D interior and exterior ratings. These more advanced control systems incorporate an intuitive touch screen control interface in a wall mounted enclosure. Advanced features include diagnostics to detect high refrigerant pressures and indicate when the evaporator fan, condenser fan and compressor are engaged!  

For more information and selection assistance regarding these controls, please see the Optional Features Page of this Product Section or contact a Bebco Sales Associate now!

5 – Operating Voltage

Z120 VAC Single Phase 60 Hz

(090 & 120 Units)
A208/230 VAC Single Phase 60 Hz

(180, 240 & 360 Units)
UCustom Voltage

(consult factory for alternate power supply options)
Click here to learn more...

Bebco Model SAC and SHP Split System Air Conditioners and Heat Pumps are offered in specific voltages, as indicated in the Model Number Matrix. As noted, our 9,000 and 12,000 BTUH Units require a 120 VAC Power Source, and our 18,000 to 36,000 BTUH Units require a 208/230 VAC Power Source.

For the specific amperage requirements of each unit, please visit the Drawings and Specifications Page in this Product Section.   However, please note Bebco can easily supply power transformers for your Split System Air Conditioner or Heat Pump Unit to operate using your available power source.

For more information regarding our unit operating voltages, please contact a Bebco Sales Associate now!

6 – Coil Coatings & Condenser Case Finishes

Segment A: Coil & Refrigerant Tube Coatings *2
CHeresite® ES-600 Coating

(condenser unit only)
EHeresite® ES-600 Coating

(evaporator unit only)
HHeresite® ES-600 Coating

(both units)
UCustom Coating

(consult factory)
XExcluded
Segment B: Condenser Case Finish *3
N2B Cover Finish

(for CS & CX Cases)
SWhite Sprayed Urethane
PWhite Epoxy Powder Coated
XExcluded

(for EC Cases Only)
GANSI 61 Gray Sprayed Urethane
TANSI 61 Gray Powder Coated
UCustom Finish
Click here to learn more...

Warranted by the demands of harshly corrosive environments such as Hydrogen Sulfide or Chlorine in some refineries and off-shore environments, Bebco provides Heresite® ES-600 Condenser Coil and Refrigerant Tubing Coatings as an option to protect all Model SAC and SHP Condenser and Evaporator Units coils and refrigerant tubing.

Please contact a Bebco Sales Associate now for more information!

To further supplement corrosion protection, Bebco also offers numerous case finishes for our Stainless Steel CS and CX Condenser Cases. These sprayed and powder coated paint finishes greatly extend the service life of the cover, base, brackets and partitions, and ensure years of corrosion resistance to elements such as Hydrogen Sulfide, Chlorine, and Offshore Salt-Air Environments.

Please contact a Bebco Sales Associate now for more information regarding condenser unit case and chassis finishes!

7 – Condenser Line Set, Power Cable & Control Cable Lengths *4

Segment A: Line Set Length
1616 Feet

(standard)
2525 Feet
4040 Feet
Segment B: Evaporator Unit Power Cable & Condenser Unit Control Cable Lengths
2020 Feet

(standard)
3030 Feet
5050 Feet
Click here to learn more...

All Bebco Model SAC & SHP Split System Air Conditioners and Heat Pumps are provided with pre-insulated refrigerant tubing lines, pre fitted with connection fittings to interconnect the Evaporator and Condenser Units.  A 16 foot long line set is supplied as our standard at no additional charge, and 25 and 40 feet line sets are also available. 

We also provide 20 foot long power and control cables to interconnect the Evaporator Unit, Smart Control Enclosure if applicable and the Condenser Unit, and 30 and 50 feet cables also available as options. 

Please ensure the line set length you select will be sufficient for unit interconnection by a licensed air conditioning technician, and please also consider contacting a Bebco Sales Associate for assistance in selecting the correct line set and cable length!

* MODEL NUMBER SELECTION NOTES:

  1. SHP Units with “B” Basic Controls are intended for use in unclassified areas, with all optional case material, coil coating and case finishes. *** Please note Units with “B” Controls do not feature Hazardous Location modifications, and are therefore classified as Ordinary Location HVAC Devices and provided with Original Factory Certification Markings.
    SHP Units with “E” Eco Pump™ Controls are suitable for Buildings or Rooms with Pressurized or Unclassified Interior Ratings with Class I, Division 2, Group A-D Exterior Ratings.
    SAC & SHP Units with “S” Smart Cool™ or Smart Pump™ Controls are suitable for Buildings or Rooms with Class I, Division 2, Group A-D Interior and Exterior Ratings.
    Please contact a Bebco Sales Associate for custom control enclosure cable length.
  2. Please note Coil Coatings are not applied to Line Sets, as specified in the last Segment.
    Please specify custom coating in writing at time of order.
  3. 2b Finish applies to Condenser Unit case only – chassis parts are not finished. All other finishes apply to Condenser Unit case and chassis parts. Please specify custom Condenser Unit finish in writing at time of order.
  4. Please carefully evaluate Line Set and Cable Lengths required before placing an order, and contact a Bebco Sales Associate for custom line set and cable lengths.

Please contact us for information regarding any aspect of unit customization.
We’ll be pleased to review all aspects of this unique product and strive to
meet any special requirements!