Hazardous Classified Roof Mount Air Conditioners & Heat Pumps

Applications

  • Crane Cabs
  • Data Loggers
  • Security Centers
  • Wire Line Cabins
  • Analyzer Shelters
  • Portable Laboratories
  • Small Control Rooms
  • Motor Control Centers

 

The rugged design of Bebco Model RAC & RHP Units make them an ideal solution for small or portable structures!

Scroll down or contact a Bebco Sales Associate to learn more…

CASE STUDIES

Wire Line Cabin

Surrounding Area:  Class 1, Division 2, Group C & D Hazardous Rating

Interior Space:   Declassified by NFPA 496 Pressurization

Bebco Solution:  3 RHP Eco Pump™ Units & 1 RDP Pressurizer

Click here to learn more...

This Wire Line Cabin is equipped with three Bebco Model RHP Hazardous Location Roof Mounted Heat Pumps, mounted alongside a roof mounted Remote Pressurizer to protect and control the interior climate.

An unusually excessive heat load due to the amount of equipment inside the cabin make cooling a year-round necessity, despite wide fluctuation of surrounding ambient temperatures.

In addition, this cabin is equipped with a flexible fresh air intake duct that must often be routed to a location below the cabin to attain a source of fresh air.

Portable Laboratory

Surrounding Area:  Class 1, Division 2, Group B Hazardous Rating

Interior Space:  Protected by Emergency Ventilation System

Bebco Solution:  2 RAC Smart Cool™ Units & 2 WMV Ventilation Fans

Click here to learn more...

This Portable Laboratory features two Bebco Model RAC Hazardous Location Roof Mount Air Conditioners and two Bebco Model WMV Wall Mount Ventilation Fans that are controlled by an alarm system provided by others.

The Fans introduce fresh air in the laboratory if any gas is detected and the gas detector sends a remote alarm signal to a nearby control room to alert operators of an onerous condition.

Sealed glove-box vent hoods were also utilized to mitigate hazards during sample preparation, to limit the need for emergency ventilation.

Entry Gate Security Kiosk

Surrounding Area:  Unclassified Ordinary Location

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RAC Eco Cool™ Unit

Click here to learn more...

This Security Kiosk is equipped with one Bebco Model RAC Hazardous Location Roof Mounted Air Conditioner.

This kiosk is located just outside a classified location and requires 24 hour attendance to accommodate product transportation truck filling operations.  Since there are flammable liquid tanks very nearby, the Authority Having Jurisdiction (AHJ) required a Class I Division 2 exterior equipment rating to ensure the kiosk can be operated safely at all times.

Offshore Rig Crane Cab

Surrounding Atmosphere:  Highly Corrosive Unclassified Rating

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RHP Basic Unit

Click here to learn more...

The small crane cabin located to the right side of the crane boom features a Bebco Model RHP Ordinary Location Roof Mount Heat Pump with Basic Controls, to provide comfortable year-round working conditions.

Due to the cabin’s location high above the offshore oil platform it serves, the only critical issue is a highly corrosive salt air environment.  For this reason, the customer selected a 316 stainless steel case and our Heresite® ES-600 Coil and Refrigerant Tube coating to greatly extend the service life-span of this unit.

A standard discharge grille with integrated Basic controls is positioned directly over the operator to maximize air distribution effectiveness and place the unit controls within easy standing reach of the operator.  As an added  benefit, the unit features a hand-held remote control, so the operator may remain seated while adjusting the unit.

Beat the elements with superior corrosion resistance options!

Bebco Model RAC Air Conditioners and RHP Heat Pumps can provide a superior solution to applications in highly corrosive on-shore and off-shore locations.  Options include economical polycarbonate covers with galvanized steel chassis, 304 or 316 stainless steel covers and chassis, or hybrid versions with polycarbonate covers and 304 or 316 stainless steel chassis.

To further enhance corrosion resistance, we can also apply spray painted or powder coated finishes to our galvanized or stainless-steel covers and chassis.

Learn more on our Optional Features Page…

Click here to learn about Suitability, Installation Advantages & Choosing the Best Control System...

Suitability & Installation Advantages

Bebco Model RAC Air Conditioners and RHP Heat Pumps are suitable for any environment with optional enhancements for corrosion resistance, and suitable for any application from Unclassified to Class I, Division 2, Group A-D Hazardous Areas.

Bebco Model RAC Air Conditioners and RHP Heat Pumps are intended for industrial applications.  They are ideal for small control rooms, guard stations, laboratories, analyzer houses and other industrial facility structures ranging from small to mid-size rooms or buildings.

Since these units can be mounted quickly and easily over a small curb flanged roof cutout, they are also extremely practical retrofit units to provide new or supplemental cooling and heating, and practical for multiple or large rooms when used in tandem.

Smart Cool™ & Smart Pump™ Controls have alarm contacts!

As a very unique feature, Bebco Model RAC and RHP Units with Smart Cool™ or Smart Pump™ Controls feature alarm contacts and flashing red alarm screens.  Multiple Unit alarm contacts for buildings in remote locations can be wired in series to a single constantly attended alarm point, so operators can respond promptly to act upon any unit failure.

In addition, these alarm contacts can be set as open or close to alarm so installers are free to utilize either directly powered or fail-safe alarm circuits.

Contact us now to satisfy your highly corrosive environment and hazardous classified area applications!

Which Control Option is best?

Basic Controls
These controls are suitable for unclassified  rooms or buildings in mild to highly corrosive areas that are not used to store or process flammable or ignitable materials, located in corrosive but unclassified surrounding environments.

 

 

  • Corrosive Chemical Plants
  • Water Treatment Facilities
  • Pulp & Paper Plants
  • Marine Loading Docks
  • Near-Shore Facilities
  • Offshore Rigs

Eco Cool™ & Eco Pump™ Controls
These controls are suitable for protected or declassified rooms or buildings that are not used to store or process flammable or ignitable materials, and are located in or adjacent to classified surrounding environments.

  • Mining, Drilling & Fracking
  • Volatile Chemical Plants
  • Petroleum Refineries
  • Safe Havens & Dock Houses
  • Control & Operation Centers
  • Guard Stations & Security Kiosks

Smart Cool™ & Smart Pump™ Controls
These controls are suitable for classified rooms or buildings located in a classified surrounding environments.  They are also idea for remote or infrequently occupied rooms or buildings critical to operations.

  • Volatile Chemical Plants
  • Oil & Gas Exploration
  • Petroleum Refineries
  • Mobile Laboratories
  • Wireline & Data Logger Cabins
  • Analyzer Shelters & Houses

Hazardous Classified Roof Mount Air Conditioners & Heat Pumps

Applications

  • Crane Cabs
  • Data Loggers
  • Security Centers
  • Wire Line Cabins
  • Analyzer Shelters
  • Portable Laboratories
  • Small Control Rooms
  • Motor Control Centers

 

The rugged design of Bebco Model RAC & RHP Units make them an ideal solution for small or portable structures!

Scroll down or contact a Bebco Sales
Associate to learn more…

CASE STUDIES

Wire Line Cabin

Surrounding Area:  Class 1, Division 2, Group C & D Hazardous Rating

Interior Space:   Declassified by NFPA 496 Pressurization

Bebco Solution:  3 RHP Eco Pump™ Units & 1 RDP Pressurizer

Click here to learn more...

This Wire Line Cabin is equipped with three Bebco Model RHP Hazardous Location Roof Mounted Heat Pumps, mounted alongside a roof mounted Remote Pressurizer to protect and control the interior climate.

An unusually excessive heat load due to the amount of equipment inside the cabin make cooling a year-round necessity, despite wide fluctuation of surrounding ambient temperatures.

In addition, this cabin is equipped with a flexible fresh air intake duct that must often be routed to a location below the cabin to attain a source of fresh air.

Portable Laboratory

Surrounding Area:  Class 1, Division 2, Group B Hazardous Rating

Interior Space:  Protected by Emergency Ventilation System

Bebco Solution:  2 RAC Smart Cool™ Units & 2 WMV Ventilation Fans

Click here to learn more...

This Portable Laboratory features two Bebco Model RAC Hazardous Location Roof Mount Air Conditioners and two Bebco Model WMV Wall Mount Ventilation Fans that are controlled by an alarm system provided by others.

The Fans introduce fresh air in the laboratory if any gas is detected and the gas detector sends a remote alarm signal to a nearby control room to alert operators of an onerous condition.

Sealed glove-box vent hoods were also utilized to mitigate hazards during sample preparation, to limit the need for emergency ventilation.

Entry Gate Security Kiosk

Surrounding Area:  Unclassified Ordinary Location

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RAC Eco Cool™ Unit

Click here to learn more...

This Security Kiosk is equipped with one Bebco Model RAC Hazardous Location Roof Mounted Air Conditioner.

This kiosk is located just outside a classified location and requires 24 hour attendance to accommodate product transportation truck filling operations.  Since there are flammable liquid tanks very nearby, the Authority Having Jurisdiction (AHJ) required a Class I Division 2 exterior equipment rating to ensure the kiosk can be operated safely at all times.

Offshore Rig Crane Cab

Surrounding Atmosphere:  Highly Corrosive Unclassified Rating

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RHP Basic Unit

Click here to learn more...

The small crane cabin located to the right side of the crane boom features a Bebco Model RHP Ordinary Location Roof Mount Heat Pump with Basic Controls, to provide comfortable year-round working conditions.

Due to the cabin’s location high above the offshore oil platform it serves, the only critical issue is a highly corrosive salt air environment.  For this reason, the customer selected a 316 stainless steel case and our Heresite® ES-600 Coil and Refrigerant Tube coating to greatly extend the service life-span of this unit.

A standard discharge grille with integrated Basic controls is positioned directly over the operator to maximize air distribution effectiveness and place the unit controls within easy standing reach of the operator.  As an added  benefit, the unit features a hand-held remote control, so the operator may remain seated while adjusting the unit.

Beat the elements with superior
corrosion resistance options!

Bebco Model RAC Air Conditioners and RHP Heat Pumps can provide a superior solution to applications in highly corrosive on-shore and off-shore locations.  Options include economical polycarbonate covers with galvanized steel chassis, 304 or 316 stainless steel covers and chassis, or hybrid versions with polycarbonate covers and 304 or
316 stainless steel chassis.

To further enhance corrosion resistance, we can also apply spray painted or powder coated finishes to our galvanized or stainless-steel covers and chassis.

Learn more on our Optional Features Page…

Click here to learn about Suitability, Installation Advantages & Choosing the Best Control System...

Suitability & Installation Advantages

Bebco Model RAC Air Conditioners and RHP Heat Pumps are suitable for any environment with optional enhancements for corrosion resistance, and suitable for any application from Unclassified to Class I, Division 2, Group A-D Hazardous Areas.

Bebco Model RAC Air Conditioners and RHP Heat Pumps are intended for industrial applications.  They are ideal for small control rooms, guard stations, laboratories, analyzer houses and other industrial facility structures ranging from small to mid-size rooms or buildings.

Since these units can be mounted quickly and easily over a small curb flanged roof cutout, they are also extremely practical retrofit units to provide new or supplemental cooling and heating, and practical for multiple or large rooms when used in tandem.

Smart Cool™ & Smart Pump™ Controls have alarm contacts!

As a very unique feature, Bebco Model RAC and RHP Units with Smart Cool™ or Smart Pump™ Controls feature alarm contacts and flashing red alarm screens.  Multiple Unit alarm contacts for buildings in remote locations can be wired in series to a single constantly attended alarm point, so operators can respond promptly to act upon any unit failure.

In addition, these alarm contacts can be set as open or close to alarm so installers are free to utilize either directly powered or fail-safe alarm circuits.

Contact us now to satisfy your highly corrosive environment and hazardous classified area applications!

Which Control Option is best?

Basic Controls
These controls are suitable for unclassified  rooms or buildings in mild to highly corrosive areas that are not used to store or process flammable or ignitable materials, located in corrosive but unclassified surrounding environments.

  • Corrosive Chemical Plants
  • Water Treatment Facilities
  • Pulp & Paper Plants
  • Marine Loading Docks
  • Near-Shore Facilities
  • Offshore Rigs

Eco Cool™ & Eco Pump™ Controls
These controls are suitable for protected or declassified rooms or buildings that are not used to store or process flammable or ignitable materials, and are located in or adjacent to classified surrounding environments.

  • Mining, Drilling & Fracking
  • Volatile Chemical Plants
  • Petroleum Refineries
  • Safe Havens & Dock Houses
  • Control & Operation Centers
  • Guard Stations & Security Kiosks

Smart Cool™ & Smart Pump™ Controls
These controls are suitable for classified rooms or buildings located in a classified surrounding environments.  They are also idea for remote or infrequently occupied rooms or buildings critical to operations.

  • Volatile Chemical Plants
  • Oil & Gas Exploration
  • Petroleum Refineries
  • Mobile Laboratories
  • Wireline & Data Logger Cabins
  • Analyzer Shelters & Houses

Hazardous Classified Roof Mount Air Conditioners & Heat Pumps

Applications

  • Crane Cabs
  • Data Loggers
  • Security Centers
  • Wire Line Cabins
  • Analyzer Shelters
  • Portable Laboratories
  • Small Control Rooms
  • Motor Control Centers

 

The rugged design of Bebco Model RAC & RHP Units make them an ideal solution for small or portable structures!

Scroll down or contact a Bebco Sales
Associate to learn more…

CASE STUDIES

Wire Line Cabin

Surrounding Area:  Class 1, Division 2, Group C & D Hazardous Rating

Interior Space:   Declassified by NFPA 496 Pressurization

Bebco Solution:  3 RHP Eco Pump™ Units & 1 RDP Pressurizer

Click here to learn more...

This Wire Line Cabin is equipped with three Bebco Model RHP Hazardous Location Roof Mounted Heat Pumps, mounted alongside a roof mounted Remote Pressurizer to protect and control the interior climate.

An unusually excessive heat load due to the amount of equipment inside the cabin make cooling a year-round necessity, despite wide fluctuation of surrounding ambient temperatures.

In addition, this cabin is equipped with a flexible fresh air intake duct that must often be routed to a location below the cabin to attain a source of fresh air.

Portable Laboratory

Surrounding Area:  Class 1, Division 2, Group B Hazardous Rating

Interior Space:  Protected by Emergency Ventilation System

Bebco Solution:  2 RAC Smart Cool™ Units & 2 WMV Ventilation Fans

Click here to learn more...

This Portable Laboratory features two Bebco Model RAC Hazardous Location Roof Mount Air Conditioners and two Bebco Model WMV Wall Mount Ventilation Fans that are controlled by an alarm system provided by others.

The Fans introduce fresh air in the laboratory if any gas is detected and the gas detector sends a remote alarm signal to a nearby control room to alert operators of an onerous condition.

Sealed glove-box vent hoods were also utilized to mitigate hazards during sample preparation, to limit the need for emergency ventilation.

Entry Gate Security Kiosk

Surrounding Area:  Unclassified Ordinary Location

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RAC Eco Cool™ Unit

Click here to learn more...

This Security Kiosk is equipped with one Bebco Model RAC Hazardous Location Roof Mounted Air Conditioner.

This kiosk is located just outside a classified location and requires 24 hour attendance to accommodate product transportation truck filling operations.  Since there are flammable liquid tanks very nearby, the Authority Having Jurisdiction (AHJ) required a Class I Division 2 exterior equipment rating to ensure the kiosk can be operated safely at all times.

Offshore Rig Crane Cab

Surrounding Atmosphere:  Highly Corrosive Unclassified Rating

Interior Space:  Declassified by AHJ

Bebco Solution:  1 RHP Basic Unit

Click here to learn more...

The small crane cabin located to the right side of the crane boom features a Bebco Model RHP Ordinary Location Roof Mount Heat Pump with Basic Controls, to provide comfortable year-round working conditions.

Due to the cabin’s location high above the offshore oil platform it serves, the only critical issue is a highly corrosive salt air environment.  For this reason, the customer selected a 316 stainless steel case and our Heresite® ES-600 Coil and Refrigerant Tube coating to greatly extend the service life-span of this unit.

A standard discharge grille with integrated Basic controls is positioned directly over the operator to maximize air distribution effectiveness and place the unit controls within easy standing reach of the operator.  As an added  benefit, the unit features a hand-held remote control, so the operator may remain seated while adjusting the unit.

Beat the elements with superior corrosion resistance options!

Bebco Model RAC Air Conditioners and RHP Heat Pumps can provide a superior solution to applications in highly corrosive on-shore and off-shore locations.  Options include economical polycarbonate covers with galvanized steel chassis, 304 or 316 stainless steel covers and chassis, or hybrid versions with polycarbonate covers and 304 or
316 stainless steel chassis.

To further enhance corrosion resistance, we can also apply spray painted or powder coated finishes to our galvanized or stainless-steel covers and chassis.

Learn more on our Optional Features Page…

Click here to learn about Suitability, Installation Advantages & Choosing the Best Control System...

Suitability & Installation Advantages

Bebco Model RAC Air Conditioners and RHP Heat Pumps are suitable for any environment with optional enhancements for corrosion resistance, and suitable for any application from Unclassified to Class I, Division 2, Group A-D Hazardous Areas.

Bebco Model RAC Air Conditioners and RHP Heat Pumps are intended for industrial applications.  They are ideal for small control rooms, guard stations, laboratories, analyzer houses and other industrial facility structures ranging from small to mid-size rooms or buildings.

Since these units can be mounted quickly and easily over a small curb flanged roof cutout, they are also extremely practical retrofit units to provide new or supplemental cooling and heating, and practical for multiple or large rooms when used in tandem.

Smart Cool™ & Smart Pump™ Controls have alarm contacts!

As a very unique feature, Bebco Model RAC and RHP Units with Smart Cool™ or Smart Pump™ Controls feature alarm contacts and flashing red alarm screens.  Multiple Unit alarm contacts for buildings in remote locations can be wired in series to a single constantly attended alarm point, so operators can respond promptly to act upon any unit failure.

In addition, these alarm contacts can be set as open or close to alarm so installers are free to utilize either directly powered or fail-safe alarm circuits.

Contact us now to satisfy your highly corrosive environment and hazardous classified area applications!

Which Control Option is best?

Basic Controls
These controls are suitable for unclassified  rooms or buildings in mild to highly corrosive areas that are not used to store or process flammable or ignitable materials, located in corrosive but unclassified surrounding environments.

 

 

  • Corrosive Chemical Plants
  • Water Treatment Facilities
  • Pulp & Paper Plants
  • Marine Loading Docks
  • Near-Shore Facilities
  • Offshore Rigs

Eco Cool™ & Eco Pump™ Controls
These controls are suitable for protected or declassified rooms or buildings that are not used to store or process flammable or ignitable materials, and are located in or adjacent to classified surrounding environments.

  • Mining, Drilling & Fracking
  • Volatile Chemical Plants
  • Petroleum Refineries
  • Safe Havens & Dock Houses
  • Control & Operation Centers
  • Guard Stations & Security Kiosks

Smart Cool™ & Smart Pump™ Controls
These controls are suitable for classified rooms or buildings located in a classified surrounding environments.  They are also idea for remote or infrequently occupied rooms or buildings critical to operations.

  • Volatile Chemical Plants
  • Oil & Gas Exploration
  • Petroleum Refineries
  • Mobile Laboratories
  • Wireline & Data Logger Cabins
  • Analyzer Shelters & Houses