Bebco offers two distinct Case Styles with different metal gauges (thickness) and fabrication methods to meet your requirement or preference for the lowest possible cost or highest level of durability. However, Economy and Commercial Grade Cases are both fabricated using galvanneal steel with painted or powder coated finishes or 304 or 316 stainless steel with painted, powder coated or 2B finishes to ensure years of service in harsh industrial applications.

Regardless of your choice, rest assured our Economy Grade Cases provide ample access to service all components, just like our more robust Commercial Grade Cases.

For assistance in selecting the proper case style and material for your application, please contact a Bebco Sales Associate now!

As illustrated above, Standard Discharge Configuration Units filter air as it returns to the lower grille of the evaporator compartment and emits conditioned air from the top grille, while Reverse Discharge Configuration Units filter air as it returns to the upper grille of the evaporator compartment and emits conditioned air from the bottom grille.

These variations permit Bebco Wall Mount Air Conditioners and Heat Pumps to satisfy applications ranging from spaces with no special requirements to variable frequency drive and switchgear buildings with extremely serious heat dissipation requirements. We also offer a variety of compressors to best serve your unique requirements.

For selection assistance, please call a Bebco Sales Associate now, to discuss your application!

Bebco offers units with either one air conditioner or heat pump or two air conditioners or heat pumps in a single case. Single Style Units are available in all cooling tonnage ratings and satisfy most applications where failure of the unit does not constitute a critical situation.

Dual or Redundant Style Units are available in most tonnages, and they address critical applications where auto lead-lag alternation or redundant performance is essential to ensure a continuous, uninterrupted flow of conditioned air within your room or building.

If you’re unsure about the best option, please consult with a Bebco Sales Associate to ensure the style or tonnage you choose will satisfy your particular application. We offer expert guidance and sizing calculations free of obligation!

Bebco integrates ancillary systems to meet NFPA 496 Code requirements for pressurization or accomplish air volume exchanges to meet ventilation recommendations such as those published in API 500.

Blower configurations can align or contrast with unit styles as needed, and pressurizers are offered in variable or constant speeds, while ventilators are offered in manual or automatically activated variations for continuous or emergency ventilation requirements.

Blower locations, sizes, cfm ratings and horsepower vary depending on needs, and we also offer options regarding whether the blowers are powered by the unit or by separate power sources.

As experts in hazardous location climate control, expect nothing less than exceptional options from Bebco!
Close

To provide your building or room with optimal indoor air quality when pressurization or ventilation is not required, Bebco offers fresh air intakes that introduce outdoor air into your space at a carefully metered rate.

The intake can be located as needed to reduce conflict with other outdoor devices, and feature manual or automatically controlled dampers and single, multi-pass particulate or HEPA filters.

These non-powered fresh air intakes can also be adapted with stack flanges, so air can be drawn from any elevation or location desired to reach the best quality air source.

When indoor air quality comes to mind, ask a Bebco Sales Person for assistance with specifying this value-adding feature. Without doubt, your staff will breath easier and be more productive!

The ultimate degree of indoor air quality is achieved by basic to highly advanced gas phase filtration system options. To ensure performance, Bebco collaborates with the nation’s most renowned sources for pre and post filters, active carbon air filters, HEPA filters, adsorbent cells, activated carbon cartridges adsorbent media canisters and deep bed adsorbing media.

Specification begins by identifying all contaminants, be they corrosive, toxic or otherwise, determining concentrations in the surrounding atmosphere, establishing volume of the building or room and committing to a certain degree of reduction or elimination.

We then provide solutions for introduced air, room air or both, in a fully transparent manner to ensure your satisfaction!

Considering the broad range of unit configurations, styles and sizes, along with potential provisions for pressurization, ventilation and room heat, Bebco offers the most extensive range of operating voltages possible in single or three phases and 50 or 60 hertz power sources.

Each unit size is available in a reasonable spectrum of operating voltages, and in more elaborate circumstances, Bebco can supply transformers and other voltage, phase and hertz converting devices to meet exotic, variable or limited power source options.

The process of specifying an operating voltage for the unit you require begins by letting us know what power sources you have available. We can then compare our options with your limitations and determine the best power solution!

Established upon inception of our wall mount air conditioner and heat pump product line, split ratings provide a distinct cost advantage and ensure no product is over-engineered. Essentially, air conditioners and heat pumps are comprised of a condenser compartment and evaporator compartment.

If properly fabricated, these two compartments are completely isolated, such that the condenser compartment is exposed only to the atmosphere surrounding a building or room, while the evaporator compartment is exposed only to the room environment.

As the only exception, a fresh air source for pressurization, ventilation or air quality can be limited in extremely safe and precise manners. Take advantage of this fact and allow us to keep your costs reasonable!

Electrical controls are an extremely critical aspect of any industrial duty air conditioner or heat pump. They drive and enable the operation of the compressor and blowers, monitor and measure various levels of refrigerant system performance, and enable any level of interface desired, from a simple on-off switch and thermostat to a PLC with an HMI touch screen display, comprehensive on-board diagnostics and telemetry or network-based control and performance monitoring.

Beyond the actual components provided, Bebco also provides a wide array of locations, accessibility and housing solutions for your electrical controls. To begin the process of establishing what form of electrical controls will work best for your particular application, please contact us!

Bebco offers a comprehensive range of operator interface solutions, from a simple on-off switch and thermostat to a PLC controller or an HMI touch screen display, with comprehensive on-board diagnostics and telemetry or network-based control and performance monitoring.

As shown above, we present your unit interface devices in an ergonomic manner, that are easily accessible and easy to understand and operate. In addition to Remote Control Panels, our Smart Grilles™ are prewired to install quickly and Smart Snouts™ are pre-integrated with all temperature controls, unit controls and warning indicators.

To begin the process of determining what’s best for you, please contact a Bebco Application Specialist now to develop a comprehensive unit specification!

When you select a dual or redundant side-by-side unit style, Bebco provides a common interface to permit easy control of your unique unit. Optional controls include auto change-over to ensure both units are cycled routinely, automatic or manual lead-lag alternation to ensure that extreme cooling load compensation is equally shared by both units, and automatic or manual load transfer controls to ensure continuous cooling even if one unit should fail in service.

At Bebco, we routinely provide dual and redundant units to provide N+1 and Lead-Lag Systems. We understand the critical nature of fail-safe redundancy, and best of all we make it easy for you to rest assured our units will never let you down!

Contact a Bebco Sales Associate for more information on these unique control options for your dual or redundant wall mount air conditioners and heat pumps!

Bebco applies our expertise in hazardous location climate control systems to offer optimal solutions not only for cooling but room heating! When your building or room is pressurized, Bebco provides fail-safe interlocks that prohibit the heating circuit from energizing until safe pressure is attained, which permits use of Unclassified wire heating elements.

But if you prefer a higher level of safety or if the environment of your building or room is rated as Class I or II, Division 2, Bebco will furnish our units with fin tube or fin bar heating elements that are completely sealed to prevent autoignition of the atmosphere. But regardless of which option you select, Bebco also equips all heating elements with snap-action temperature limit switches to prevent our elements from exceeding your T-Code.

Please contact a Bebco Application Specialist now to develop your preferred unit heating solution!

As another critical element of our Wall Mount Hazardous Location Air Conditioner and Heat Pump unit design, Bebco offers OEM Manufacturer Coils, Copper Tube and Aluminum Fin Coils and Copper Tube and Copper Fin Coils to meet your application’s requirements with ease.

We also provide two of the World’s most superior coil coatings that you are free to select to protect your condenser coil, evaporator coil and refrigerant system tubing as you determine best for your particular environment, each carefully applied in complete accordance with their Manufacturer’s application procedures.

To further protect your Bebco Wall Mount Air Conditioner or Heat Pump, we also offer numerous case and condenser section chassis finishes, including sprayed urethane or powder coating that provides years of highly corrosion resistant protection for your valued investment.

Please contact a Bebco Sales Associate for more information and also be sure to visit our Optional Features Section for technical bulletins and more information on our Premier Adsil® Heresite® and Modine® coil coatings!

We understand your preference may vary, so Bebco offers a comprehensive level of options for your supply and return openings! We begin by providing standard supply and return grilles that are common to the industry. We can also combine a standard supply grille with a Bebco Smart Grille™ to provide your unit controls in a plug-and-play solution.

We also offer Smart Snouts™ to simplify unit installation to the maximum degree possible; and finally, to ensure we provide a total solution to your application, we also provide manual or automatically adjusted air-flow regulation dampers, rated fire dampers and blast resistant dampers.

Look to Bebco as a one-stop shop that provides a total solution to meet every requirement of your critical application and contact a Bebco Sales Associate for assistance in selecting the right Air Supply and Return Opening solution for your project!

Our service technicians thought they’d seen it all, when they responded to an emergency service call. Responding immediately to what the client described as a failure of our unit, our service technicians discovered the evaporator compartment was heavily contaminated, along with the condenser compartment, and that the condenser and evaporator coils were so heavily clogged with dust that unit performance had decreased by 80 percent after only the first six months of service, as shown in the actual field service photos to the right.

Following the extremely costly and non-warranted services to rectify these problems, we elected to begin offering this unique solution to extremely dusty environments, which prevents compressor overheating and failure, condenser coil fan motor failure and extreme stress on the entire refrigerant system.

Be sure to evaluate your field conditions carefully and consider this extremely important option to preserve your unit’s performance and lifespan if you suspect any unusually high level of environmental contaminants!