This Motor Control Center houses motor controls for a compressor station and contains a modest amount of equipment with a very low headload. The Building is located in a Class I, Division 2 Group C and D rated area, so it is equipped with one Bebco Model WAC 2.5 Ton Hazardous Location Wall Mount Air Conditioner in a G2 configuration along with one Bebco Model WDP Building Pressurization Unit, to cool and declassify the interior space.

In tandem, the Air Conditioner, as furnished with ordinary location heating elements and the Pressurization Unit maintain a stable operating temperature year-round, while maintaining safe conditions fully compliant to NFPA 496.

This Control Room features a large operator workstation area along with a restroom and has a very nominal headload . The Building serves a very essential purpose to refinery operation and is located in a Class I, Division 2 Group B rated area. It is therefore equipped with two Bebco Model WAC 4 Ton Hazardous Location Wall Mount Air Conditioners in G2 configurations with ordinary location heating elements and a Bebco Model DUP Dual Unit Pressurization System.

In addition, a wall mounted Bebco Control Panel automatically cycles the duty of both Units. The Units then supply a common overhead air register duct as also provided by Bebco to distribute air evenly to all interior spaces.

A safe, clean source of intake air is provided by a Bebco Model RPS Rigid Pipe Stack (not shown) and Bebco also provided all electrical power disconnects, as shown. As a result, the climate and safety of this building are maintained consistently, by the use of these redundant Units.

This Security Center features a video surveillance system, plant shutdown controls and security officer workstations along with a restroom and is located in a temperate climate area. While it is positioned at an entry point of a chemical manufacturing plant unit, it’s proximity to a nearby unit led Safety Managers to deem it as Class I, Division 2 Group B rated area. It is therefore equipped with one Bebco Model WAC 3 Ton Hazardous Location Wall Mount Air Conditioner in G2 configurations with ordinary location heating elements and an integrated Pressurization System.

In addition, as shown in this dramatic image, the Pressurization System was furnished with a Bebco Series SPSA Spiral Pipe Stack Assembly, consisting of spiral pipe, a stack cap and our wind load certified Model SPSK Spiral Pipe Stanchion Kit, to eliminate the need for guywires.

The Unit features a Bebco Smart Grille™ with a Digital Thermostat and Remote Control, so security officers can adjust temperature from their workstations as needed, while sustaining constant vigilance and plant safety duties.