Our Clients say it best….

“We purchased a Bebco Smart Pump Split System Unit and are very pleased with its performance.”

“It arrived in excellent condition, and Bebco quickly shipped a missing cable overnight, to keep us on schedule. The Unit then started
easy and runs great!”

– Kenneth Baskins, Baskins HVAC

UNIT FAULT & ROOM TEMPERATURE ALARM CONTACTS

• Indicates unit fault due to high or low refrigerant pressures
• Also indicates excessively high and low room temperatures
• Select from normally open or normally closed contact settings
• Contacts rated for up to 240 VAC at 10 Amps, maximum

EMERGENCY SHUTDOWN CIRCUIT

• Provides a means to deactivate your unit remotely
• Requires a dry closed contact to maintain unit operation
• 24 VDC milliamp voltage sensing circuit requires no shielding

As an optional feature, Bebco offers all Smart Cool™ & Smart Pump™ Controls with Room Temperature Setpoint Lockouts to prevent unauthorized adjustment or tampering.

The lockout mechanism is embedded in our Touch Screen Controller programs, and may be discreetly activated or deactivated by authorized personnel who have the knowledge to use it.

This feature is intended to prevent unwarranted or unauthorized tampering and for special applications that demand precise room temperature control.  As one example, a lockout may be essential for an analyzer building to maintain a specific temperature range that ensures proper analyzer operation and output data accuracy.

Control of Units equipped with Basic, Eco Cool™ and Eco Pump™ Controls, are limited to the person in possession of the remote control! 

AVAILABLE OPTIONS

• Economical Epoxy Coated Steel Cases & Chassis with Galvanized Brackets
• Durable 304 or 316 Grade Stainless Steel Cases, Chassis & Brackets
• Optional Sprayed or Powder Coated Case & Chassis Finishes
• 5 Year Warrantied Coil & Refrigerant Tube Coatings!

We’ve got your corrosion issues covered from
On-Shore Facilities to Offshore Oil Rigs!

If requested at time of order, Bebco coats the coils and all refrigerant tubing of Split System Condenser and Evaporator Units with Heresite® ES-600 Coil Coating, to fully protect the entire refrigerant system. Options permit you to select this coating to the outdoor condenser unit only, both units or the evaporator unit only, so you can ensure this extraordinary protection is applied specifically where it is required.

To ensure the highest level of protection and coating adhesion, the coils and tubing are first removed from the chassis of both units and carefully cleaned in accordance with the coating manufacturer’s requirements prior to coating application.

Selecting this vital option will provide protection against mild, moderate or extremely corrosive environments, whether exposure duration is considered to be intermittent, prolonged or continuous.

REFRIGERANT SERVICE PORTS
As an exclusive feature offered only by Bebco, all Model SAC & SHP Condenser Units feature high and low refrigerant system service ports!  This feature allows service technicians to measure the amount of refrigerant and add it as needed to maintain proper operation over an extended lifespan!

REFRIGERANT PRESSURE SWITCHES
Units featuring Smart Cool™ & Smart Pump™ Controls also feature high and low refrigerant pressure switches to monitor and control critical aspects of operation.  This feature provides precise unit control and allows the Unit to detect and report any issues with performance.

LOW AMBIENT CONTROLS – Provided with all Model SAC and SHP Units!

As one of our most important standard features, we provide low ambient control for all Split System Units. This control feature is provided to maximize performance and efficiency during intermittent or sustained periods of cold outdoor temperatures. By experience, we know that outdoor temperatures can fall rapidly and unexpectedly in any climate, despite the fact that our split system units are often required to offset significant heat loads inside your buildings at all times. By monitoring refrigerant head pressure with switches or transducers, our Low Ambient Controls permit the Unit to operate in a continuous and highly effective manner year-round, regardless of significant outdoor temperature fluctuations!

DEFROST CONTROLS – Provided with all Model SHP Heat Pump Units!

As another beneficial feature, all Bebco Model SHP Split System Heat Pump Units are provided with defrost control to prevent icing or frost during cold outdoor temperature conditions.

INSULATED LINE SETS
Bebco provides all Model SAC and SHP Split System Air Conditioner and Heat Pump Units with Refrigerant Line Sets to connect your indoor Evaporator Unit to your outdoor Condenser Unit. 

These copper tubes come with essential unit-mated end fittings in standard or extended lengths and are pre-insulated to maximize cooling efficiency.

LOW AMBIENT, POWER & CONTROL CABLES
Bebco provides all Model SAC and SHP Split System Air Conditioners and Heat Pump Units with low ambient, power and control cables that are suitable for unclassified or classified areas, depending on the Unit rating, as based on the control system selection. 

These cables provide all necessary wiring between your indoor Evaporator Unit, the Smart Cool™ or Smart Pump™ Control Enclosure if applicable, and your outdoor Condenser Unit. They can be easily cut to attain a perfect fit and come in both standard and extended lengths.